Overview
- Brand: TESK
- Product Code/Model : TK32-18/2
- Category: Pumps
- Product Type: Inline Single Stage Pumps Pumps
- Availability: Provided on final specification
Spec Sheets:
Description
1.1KW INLINE PUMP BARESHAFT (MOTOR NOT INCLUDED)
These pumps can withstand high temperatures and pressures. They are mainly used for HVAC systems as well as in booster systems for water supply. The piping structure ensures that the pump is directly installed in the same horizontal system with the same in- and outlet diameters. This design makes the structure and piping of the pump morePUMP STRUCTURE DESIGN
- Pull-up design with separated motor and pump body.
- The pump cover bracket acts as a connection between the motor and the pump body, using the O-ring as a seal.
- The flange sizes meet the requirements of PN16 in GB/T17241 or ISO7005-2/DIN2501
PUMP OPERATING CONDITIONS
- Pumping liquids which are thin, clean, nonflammable, non-combustible or non-explosive with no solid particles or fibers.
- Max. ambient temperature: +40 C
- Max. altitude above sea level: 1000m
PERFORMANCE CURVES
- The motors used for the measurements are based on 2900rpm or 2950 rom.
- Tolerances to ISO 9906
- Measurements have been made with airless water a temperature of 20ËšC
- Curves apply to kinematic viscosity of 1mm /s
- Select a best efficiency of the pump which is operating within the bold curve of the pump performance.
LIQUID TEMPERATURE
- Normal temperature pump:-15ËšC to 70ËšC
- Hot temperature pump:-15ËšC to 105ËšC
AMBIENT TEMPERATURE
- If the ambient temperature exceeds the 40ËšC or the pump is installed at an altitude exceeding 1000 m, the motor output power P2 will decrease.
- In such cases, it is necessary to use a higher rated motor
MAXIMUM WORKING PRESSURE
- Normal pressure type: PN12bar
- High pressure type: PN16bar
Brand
Name: TESK
Product Code/Model: TK32-18/2
Related Products
